Lepper's Paperdex

Here's a lil link to Lepper's Paperdex.
Click here!

You start by clicking the red pokéball on the Pokédex, then the blue button to start it up. You can then choose a model from the left window and move it around with the cross-control at the right. There's 2 buttons at the bottom to download the PDO or PDF. Pretty nice and there's some Pokémon that aren't on Paperpokés' list too :P

Cacnea

It's been a while since we posted a Paperpokés model on this page (and we were supposed to put all of them). This week's model is one of the funniest ones being a big spiky ball; it's also one of the saddest ones if you saw the anime (youtube that). Anyway, directly from the PP post:

Interesting Facts: Cacnea are primarily found in deserts and other arid environments. It release a strong aroma to attract prey to it, and is well adapted to the harsh desert environment. It can store water for almost up to a month. It evolves into Carturne starting at level 32.

THE PAPER MODEL
Height: 17.0 cm/6.7 in
Width: 31.2 cm/ 12.3 in
Depth: 14.3 cm/5.6 in
Pages: 6
Pieces: 41
Level: Easy
Designer: PMF
Photo: Skelekitty
NOTES: Build in numerical order - starting at the head and finishing at one of the feet. Attach spikes and arms as soon as the ring that they are attached to is assembled. This model does not stand independently, So you can either glue it to one of our Paperpokés bases, or alternatively, you can make a short, clear plastic cylinder (approximately 12mm high and 110mm circumference), and sit Cacnea on top of it, the model should stand upright quite comfortably.

Download on Paperpokés.

See you next week!

Hi everybody,
Sorry for the lack of update, most of the staff is on holiday and the rest of them spend their days at the beach or something... We'll be back next week with a bunch of new models, but until then, please visit the Forum to find some cool stuff or check Paperpokés or Paperkraft.

Have a nice day, have fun and go play outside!

----------
BTW, my new model Duskull is out in case you didn't see it yet. You might remember it when I shared the Skull with a special rabbit version last Easter. You can find it on Paperpokés along with lots of really great models.

Marill

This week, the Paperpokés team brings us Marill, a blue Water type Mouse Pokemon. The model is 15 cm high and a pretty straight forward build so you should all have fun building this cute Poke.

Get Marill from Paperpokés.

POKéDOLLS Team 4 - Poliwag, Grimer, Staryu

Team 4 of the Paperpokés Pokédoll Series is out. This week we have Poliwag, Grimer and Staryu. All easy to medium difficulty models that we hope you all have fun building. The big Pokédolls have now all been released and next Monday, Paperpokés will be returning to posting regular Pokes.

Get Team 4 from HERE.

POKéDOLLS Team 3 - Tentacool, Magikarp, Shellder

So what lives in the water, is very lazy, has a shell, two tentacles, six eyes and will kill you when it grows up? (No, it's not Ralf; I don't know where you get those ideas people.)
Yeah, it is Paperpokés' Team 3 of their serie of Pokédolls! (I know, the title was an obvious giveaway :\)

Halfway done now, 12 more dolls to go!

So you can already download Shellder, Magikrap (huh, i mean karp) and Tentacool at the usual site, and you'll be able to download the Big Snorlax monday morning!

Have a nice day / weekend!

Pokédolls Team 2

Here is the 2nd team of Pokédolls from the Paperpokés team. It consists of Pikachu, Jigglypuff and Clefairy, possibly the cutest pokémon from Generation 1.

This really could be considered a girls best friend Pokédoll pack. They're all around 12 cm tall and relatively easy to build.

We hope you have fun.

Download them from HERE.

Pokédolls - Team 1 and Lapras doll

Here's the First Team of Pokédolls from the Paperpokés Team, which is actually the first starter set from the Pokémon Red/Blue games; aren't they thematic! The difference tho is that instead of having to choose between 'em, you can actually catch 'em all! They are all 3 pages, around 13cm tall and not too hard. They also look great together!


You can also get the Lapras doll, which is the first on the big dolls.

Catch 'em all here!

3D Pokémon Trading Card

This was a late night, sleep-deprived idea that POdragon had about a week back, and then it appeared! It's not just a Pokémon trading card, but a 3D Pikachu!

It's a really simple model that has a terrific finish.

Personally, I'm not actually sure what this Pokémon card trading game is all about, even though I did read the Wikipedia article. But what I do know is that it is definitely not like Uno or Snap.

Download it here.

Pokemon Battle Diorama

The contest is over and the results are in! The following points have been given by our members to all the contestants:

52 Celebi by Brandon
47 Charmeleon by Gupu
37 Ampharos by POdragon
35 Diorama by Christina
33 Kabutops Cotton by Eyed joe
32 Charmander Doll by Nautilus
28 Smeargle by PMF
22 Rotom by Kbman
15 Onix by Alexkid
13 Mew by Mastermind
3 Unown by Linkdude

Congratulations to Brandon, Gupu and POdragon, and thanks all for participating!

I have two more crafts to post from the contest, and I'll start with the Pokemon Battle Diorama!This cute Diorama will surely look great in your craft collection!

Note that the original model is very tiny, and has MANY folds. If you're new to papercrafting or don't have any patience, you might want to do the same as the testbuilder did in the picture: Put something behind the sprites to make it have more depth. Be creative!

To see how it actually should look like, there's a reference picture in the download.

Have fun!

Download Pokemon Battle Diorama

By Christina, testbuild by PMF

Charmeleon

Charmeleon! Use flamethrower!

Charmeleon is a bipedal, reptilian creature similar to Charmander. It has crimson scales that are much darker than that of the bright red Charmander. Once again it has a tail with the tip burning with fire, a trait seen in many Fire-type Pokémon, especially the Charmander evolutionary line.

Another entry from the Contest! This evolved version of Charmander will surely be able to protect all your papercrafts! On a side note, you can now vote for your favouritet entry in the contest. If you have a forum acount, go and vote now!

Download Charmeleon here

By Gupu, info from Bulbapedia

Kabutops

Yet another Pokemon Contest entry! This one is Kabutops, by Cotton eyed Joe. Kabutops is evolved from Kabuto, which you get from the Dome Fossil. The Dome Fossil is obtainable in the Pokemon games Red, Blue, Leafgreen, Firered, and I think Diamond and Pearl.

This craft is about 8 pages, but as you can see it's worth it, it looks very nice when it's done. Great job, Cotton Eyed Joe!

Download Kabutops

Design and photo by Cotton Eyed Joe
Info from Bulbapedia

Mew

Here's another entry from the Pokemon Contest! This time it's a Mew, by mastermind777. Mew was first obtainable in the Pokemon games Red and Blue, although you have to use a glitch to catch him, and he is low level when he appears. Mew was also in some Pokemon movies, such as the first movie, Mewtwo Strikes Back, where Mew fights with his clone Mewtwo.

The download comes with 3 different sizes of this craft: 15 cm, 25 cm, and 40 cm. Nice job, mastermind777!

Download Mew

Model and picture by mastermind777
Info from Bulbapedia

Teddiursa

Here's the newest model from the Paperpokés bunch!

It's the cute teddybear aka Teddiursa, and it even comes with a Santa's hat! Even better, there's 11 different colors to choose from!

So that's our Christmas gift that we're giving you this year. Hope you're happy :)


Oh 'n BTW, don't forget to vote for the Pokémon's contest!

Magby, Blissey, Ampharos and Chimecho

The Papepokés team brings you four new models:

Magby by Pixel-Kakashi and Skelekitty. Build and photo by Skelekitty.

Blissey by PMF. Build and photo by Paperbuff.

Chimecho by POdragon. Build and photo by PMF.

Ampharos by POdragon. Build and photo by Lyrin. Ampharos is also an official entry to the NP Pokémon Contest which ended December 15.

Download Magby, Blissey, Chimecho, Ampharos.

Onix and Steelix

A contest entry from the forums. It's Onix!

Onix basically resembles a giant chain of gray boulders. The Pokémon has a magnet in its brain that serves as an internal compass. Onix's body becomes more rounded and smoother as it grows with age.

I think this craft is rather big! It's a whooping 12 pages! Because of all the seperate boulderpieces, its stance is fully customizable.

Download here

By Alexkid, info from Bulbapedia

And it's evolution, Steelix is now available on the Paperpokes website!

Steelix like to burrow underground and prefer to live inside mountains or on mountains, or even caves. They are long, large and their body is harder than any other Pokémon's.

THE PAPER MODEL
Height: 20.0 cm/7.9 in
Width: 29.4 cm/11.6 in
Depth: 31.9 cm/12.6 in
No. of Pages: 9
Level: Medium

Download steelix!

By POdragon, testbuild by Cotton Eyed Joe

Natu

We at Paperpokés don't like to sit still, so we have another Pokémon for you.

Natu is a bird-like Pokémon with a nearly spherical body. It cannot fly because its wings are not yet fully grown. If your eyes meet with this Pokémon's eyes, it will stare back intently at you. But if you move even slightly, it will hop away to safety. It evolves into Xatu at level 25.

Natu is designed by PMF. It was built and photographed by Skelekitty.

Download Natu

Celebi

You might have seen this Celebi at the Paperpokes site but before it was there it was at the Nintendopapercraft forums as an official entry to the Pokemon Contest.

Celebi is notable as the hardest to obtain Pokémon, as there are very few ways to legitimately obtain one outside Japanese games, and even there, they are only obtainable in two games. Also, Celebi was the only Pokémon of the 100 Generation II Pokémon that wasn't used in the Johto Pokérap. It is not known to evolve into or from any other Pokémon.

This model is designed by Brandon, who is a member of the Paperpokes team, which explains why Celebi is found at their site.

Brandon is nice enough to give us a choice of three Celebi sizes, 17 cm, 35 cm and 61 cm (life-size) versions.

The Pokemon Contest ends on December 15. Get your entries in.

Download Celebi

Rapidash

Paperpokés is now OPEN!

And the team brings you this model of Rapidash. It's the beautiful fire-horse Pokemon oftentimes abandoned in favor of the more popular fire types like Charizard and Arcanine, which is a pity since Rapidash can be lethal in the right hands.

Rapidash was designed by PMF and Paperbuff. The model was built by Paperbuff.

Remember that Nintendopapercraft's Pokemon Contest will be ending on December 15, so those of you who want to join should head on over to the forum to get your entries in.

Download Rapidash

Arbok

How are you doing today? Us; beside PMF who got in a fight with a squirrel, we're doing good, thanks for asking.

Paperpokés will finally open tomorrow! So to celebrate that, here's another new model, this time from POdragon. CottonEyedJoe did the testbuild and had this to say about it: "Not rated for high wind zones. Also likes to fall over sideways." A lil weight here or there might do the trick.

The Pokémon contest will end December 15th, so you better work that magic if you're still not done with your model. There's already 29 entries, but don't worry, there's still time to start a new one. Don't forget the PDFs!

Now enough diddle-daddle, here's the model and have a nice day!

Download Arbok
(yes, it's kobra backward...)

PS. I personally want to apologize to Paperlegend, he was working on Arbok and Furret for the contest and we posted both our versions before he could finish his. Désolé PL :(

Furret

Hey all!
Here's a new model fresh from the oven! Well not really, but you're not supposed to know that. Furret is a Pokémon that evolve from Sentret and can be described as the result of mixing a ferret with the Cheshire cat. Shiny form is even pink just like it while normal is brownish; don't ask me which Brandon built in that pic tho. It's not too hard to build, only 6 pages and looks really cute. (It's suffering from Amnesia tho, easter egg beware ???)

As you can see, the Paperpokés' page is still not open yet; we got some last minute trouble with download links so we're working hard on fixing that and everything should be ready soon. Don't worry, we still have some new models on the vault. We're really sorry to make you wait tho...

Model by PMF, testbuild by Brandon.

Download Furret

Rattata

Hi everyone!

Here's another pokémon, following our commitment to post one pokémon every day until the end of the contest... well almost every day.

Rattata is a mouse-type pokémon that's very easy to catch and looks really cute. In Gen 1, it is tied as being the most common land-based Pokémon available in fact, the other being Pidget; don't we all love random facts!

Anyway, I'll keep it short, PP-style:
Height: 10cm/3.9 in (foot to ear), 15cm/5.9 in (foot to tail)
Width: 14cm/5.5 in (whisker to whisker)
Depth: 16 cm/6.3 in
No. of Pages: 4
Level: Medium
Designer: PMF and Skelekitty
Photo: Paperbuff
NOTES: The mouth area can be tricky because of those huge teeth. I suggest that you build the head starting with the lower portion before moving up to the eyes/ears area so you'll have more space to move around.

Download Rattata

PS. Paperpokés open Monday and it's not invite-only, you'll be able to download all 40 models!

Octillery

Hello everyone!

From the PaperPokés team I bring you my newest model in collaboration with Paperbuff:

Octillery!

"OCTILLERY grabs onto its foe using its tentacles. This POKéMON tries to immobilize it before delivering the finishing blow. If the foe turns out to be too strong, OCTILLERY spews ink to escape."

Download it Here

Model by Pixel-Kakashi
Unfold and build by Paperbuff

Rotom

A wild Rotom appeared on your computer screen!

With a unique body that is similar to electricity, it is able to enter machines and appliances. It uses this ability to create mischief.

Oh my, another great entry for the Pokemon contest! It's a Rotom! The download comes with a small version (shown in picture) and a lifesize version. Note the blue stance that comes with it. You could ofcourse hang it onto your ceiling with some fishing wire, but if you want to let it stand on your desktop or with the rest of your collection, this stand will come in handy. It's all up to you wheter you decide to build it or not. It's the 4th page of the PDF (small version)

The "wings" should be completely cut out, not around the black squared border that's around it. For an even better look, you could cut out the white in the middle as well.

The glow and wings are flat, Rotom itself is 3D.

Download Rotom

By Kbman

New Bark Town Diorama

Hello, this model comes straight from the forums, user sora234 shares with us his diorama: New Bark Town.

This is the place where the adventure begins in PoKéMoN Gold, Silver and Cristal.

Here's where Prof. Elm gives you your first PoKéMoN, either Totodile, Cyndaquil or Chikorita, and where you find your rival peeking through the lab's window.

Download here

Hoppip

Today's post is Hoppip, made by POdragon

"This POKéMON drifts and floats with the wind. If it senses the approach of strong winds, HOPPIP links its leaves with other HOPPIP to prepare against being blown away."

Picture by PMF

Download Here

Electrode

From the tireless team at Paperpokés, this is Electrode. It is a genderless, electric Pokémon and resembles a Poké Ball, and has a tendency to explode in response to even the smallest stimuli - it is known to explode when bored just to entertain itself.

Interestingly, A trainer has a higher chance of running into wild Electric Pokémon if he/she is carrying it in the leading slot. Electrode feeds off of electricity in the atmosphere, which explains why it is normally found living in power plants - the more electric energy Electrode consumes, the faster it moves. Electrode evolves from Voltorb.

This model was designed and built by PMF, who suggests that "you can just draw the eyebrows on it with a black pen."

Download Electrode

Breloom

From the Paperpokes team, we have this model of Breloom, the Mushroom Pokemon that evolves from Shroomish. It has a dual nature, being both a Grass and Fighting type. Because of this, Breloom can offer many interesting possiblities for your game. The seed clusters at the end of its tail contain toxic spores. It moves in on its opponent with sprightly footwork and its short but stretchy arms can deliver punches.

This model was designed by POdragon and the build was done by PMF, who took a break from designing to build this cute and easy model.

Download Breloom

Gengar Version 2

Here we have Gengar, the Shadow Pokemon. At night, if the shadows appear to be moving and laughing around you, it must be Gengar doing his naughty and devious deeds.

This is a modified version of the Gengar papercraft that we have featured here previously. This one is smaller at 15 cm high and the number of pieces had been reduced significantly. The original design for Gengar was done by Pixel-Kakashi. The modifications were done by Skelekitty.

Skelekitty recommends that you build Gengar in the following order: back, face, tummy, arms, legs, then tail.

Download Gengar

Smeargle

Hello!

This is PK with another awesome model, this time by the hand of my good friend PMF.

Smeargle secretes a fluid from its tail, which can be used as paint. Smeargle is the only Pokémon known to express itself in an artistic fashion. Smeargle is also the only Pokémon that can learn any move permanently thanks to its signature move, Sketch. Awesome, right?!

This is his entry for our PoKéMoN contest!

A note from PMF:

"There's also 21 different textures with it, so you can chose pretty much any colors for the paint.
Only 6 pages and 20 cm high (8 inches)."

Download

--------------------------------

And one last thing...

Koffing

Gas Attack! Koffing is a gas pokemon, number 109. It first appeard in Pokemon Green, and red, then later in blue and yellow. Koffing appears towards the beggining of the game, and is a good Pokemon early on. It is also James' of Team Rocket's favorite pokemon, and he often uses smoke screen or sludge attack to escape from Ash and his friends, after they have tried to capture pikachu (which happens about every episode)
Anyways, This was built by PMF, and testbuilt by Skelekitty. Have fun building!

A wild Koffing appears!

Lugia

Lugia is a legendary bird pokemon, number 249. It first appeared in Pokemon Gold and Silver, released in 2000 for the gameboy color. It was a very powerful pokemon, but was a little on the difficlut side to get. The papercraft version was made by POdragon. Have fun builiding!

You encounter a wild Lugia!

Piplup

Hello, here's another PoKéMoN model: Piplup!

This cute little penguin is the water-type starter on the 4th gen pokemon games.

-----------------------

On another note, Ralf and I have been busy updating all the download links on the blog, also I managed to reduce the file size on all of Red Yoshi's models, so, instead of downloading a 60 MB model of Samus you get a neat, tight 6 MB file.

Happy downloading!!!




Finished picture by Paperbuff

Download here

Oddish

Another Pokemon released by PMF! It's Oddish!

Oddish are commonly found in the anime. Most of the time they play the victim and are usually being chased or attacked.

Note that this craft doesn't stand on its own! You will really need to have a platform where it can stand on, or otherwise it will just fall over! It's a very nice papercrafte nonetheless!

Download Oddish!

By PMF, picture by Skelekitty. Info from Bulbapedia.

Please note that I gave the wrong credits with the Ditto papercraft. PMF did the modelling, and Skelekitty did all the rest. I apologize Skelekitty!

Ditto

A wild Ditto appeared! Oh noes!

In its natural state, Ditto is a purplish gelatinous blob with vestigial facial features. However, it can take the form of anything. It is also a genderless Pokemon

Great Pokemon, Great designer, bla bla, you know the thing by now :p Still posted for archive purposes. Because I promised posting atleast one Pokemon a day during the contest, these are quite handy so I don't run out of Pokemon all of a sudden :o This doesn't mean this Pokemon is any less cool, just because it's posted out of Archive purposes! Who wouldn't want to have a Ditto in it's collection? It might transform in a Ninjatoes Adult Link sometime when it feels like it!

Download here

By Skelekitty. Info from Bulbapedia. (I bet you can already dream this small sentence by now)

Charmander Doll

The very first contest entry! And quite an original one as well!
This Charmander Doll could be obtained through the Mystery Gift in Crystal. When you used a GamePack to go into your own room in Pokemon Stadium 2, you were able to see your own room in 3D, including all the furniture and dolls. That's where this model is ripped from.

Download here!

By Nautilus

Jigglypuff

COVER YOUR EARS! IT'S JIGGLYPUFF!

Jigglypuff appear as round pink balls. Their bodies are soft and rubbery. They have small arms and legs. A Jigglypuff has a curl on its forehead and two ears.

Well, what to say? Simply a sphere with ears, hands, feet and a piece of hair. But a cute sphere, that's for sure! Your restless nights will be over once this craft stands in your room ;)

Download here

By PMF, picture by Skelekitty. Info from Bulbapedia.

Zubat

Another great Pokemon by PMF. There'll be wings! You'll like it!

Zubat is a small, blue bat-like Pokémon. It has two long, skinny tails. Zubat's face lacks any eyes and a nose. The insides of Zubat's ears and undersides of its wings are purple.

This is quite a big papercraft! Zubar will measure 24cm high x 40cm width when fully upright! Note from the testbuilder, Skelekitty: "I love these high-detail pokemon models - they are a work of art! Even as I rotate the 3D virtual model in Pepakura I can't help but be amazed at their beauty. It has this amazing flapping motion in it's wing joint that I suspect is an accidental fluke of nature! "
Sounds great! Have fun!

Download here!

By PMF, picture by Skelekitty. Info from Bulbapedia.

Slowking

Not the fanciest Pokemon Craft out there, but I think some people will like it because of it's simplicity

Slowking are regular Slowpoke who suffered a peculiar event. The King's Rock they rarely hold attracts Shellder, and gets bitten on its head instead of its tail. The poison that some Shellder secretes reached Slowpoke's brain, turning it extremely intelligent.

This craft appeared in a Japanese magazine, and therefore there is only a lined version. There aren't too many lines though, and I think some people will like to have this in their craft collection. it only has 6 pieces and one page, so you should have built it in no-time.

Download here

By Jupiter, info from Bulbapedia.

Chingling

Watch out for this cute little Pokemon, as it might take away all the attention for all your other crafts!

Chingling looks like an animated bell, with its opening representing a mouth. It also has two red and white tassles. Inside its body is a red orb that creates its cry when it is agitated, much like a real bell.

Another nice one pager by POdragon. As you can see on the picture, it's even smaller than a CD. The hands and feet are very tiny, so you might have some problems with it. I recommend folding as few things as possible with this one, so the result will look rounder.

Chingling

By POdragon, picture by PaperBuff. Info from Bulbapedia.

Poochyena

Also known as "The Bite pokemon", Poochyena enters the world of papercraft!

Poochyena's body is gray, with black coloration on its face and feet. This coloration is swapped when it evolves. Poochyena is an omnivore

It might not look like it, but this Pokemon is just one page big! If you decide not to fold anything, the craft will look somewhat rounder. You will need to fold SOME tabs though, like the ones on his ears.

Have fun!

Download here!

By POdragon. Info from Bulbapedia

Nidorino

The second pokemon for today! Don't worry, I will be posting other papercrafts soon for people who don't like Pokemon :)

Nidorino is larger than its pre-evolution. Its forehead horn is larger, as well as its ears and the spines on its back. It has grown large teeth.

It looks like you have to add tabs for the stings on it's back yourself. I suggest making these tabs as small as possible, so that you don't see too much of these tabs. You could also print out the spikes twice, and glue them together so you will have textures on both sides. It's all up to you!

Download here!

By POdragon, info from Bulbapedia

Psyduck

I CHOOSE YOU! Wait! Not you Psyduck! Get back here!

Psyduck resembles a yellow duck or platypus with a vacant stare. Its appearance, according to the Pokédex, is meant to trick enemies into thinking it is weak. It has arms with three claws on each to deliver scratches if threatened.

Another great model by PMF. The texture problems that might show on the pictures have been fixed, so don't worry about ending up with a weird textured papercraft.

Download here

By PMF, picture by SkeleKitty. Info from Bulbapedia

Squirtle

Squirtle, Squirtle! The cute Pokemon that recently appeared in the game Super Smash Bros. Brawl.

Squirtle is a bipedal turtle with its most notable feature being the hard shell on its back. This shell forms and hardens on its back after birth. It could perhaps be distantly related to some other turtle-like Pokémon, such as Torkoal and Turtwig, but Squirtle seems to only be closely related to its evolutions.

Download here! Note that there are more pokemon for download! I'll add those to the blog later, for archive purposes.

By PMF, picture by PaperBuff. Info from Bulbapedia.

Dragonite

It's a Dragonite!

Despite being bulky, Dragonite are incredibly agile and fast. Unlike it's pre-evolutions, it is orange and possesses arms and legs. They resemble a European dragon, and have a pair of little wings that can increase in size while in flight. It has a taller stature than most humans.

Note from PMF: "Just a note about Dragonite, the one in the picture is the testbuild, so the tail's too heavy.

I now changed the tail so it's level with the feet and serve as a "third leg". So no need to add weight or anything."

Awesome :) No need to add weight. That's how good this model is!

Download here!

By PMF, picture by PaperBuff. Info from Bulbapedia

Porygon 2

Hello everyone!

It's me again, and to go along with the PoKéMoN contest I bring you one of my old models: Porygon 2.

Picture by: GoblinGuy

Download

Cubone

Cubone, I choose you! Cubone, use paper!

Cubone appears to be a small brown dinosaur-like Pokémon, that constantly wears a skull (supposedly the skull of its mother) like a helmet, which masks its true face from view, a puzzlement for many trainers and researchers. It carries another bone, which it uses to attack with moves like Bone Club.

Cubone has a plump body, with strong limbs to carry its bone as a weapon around wherever it goes. A small tail is also present for balance, but it can be used for attacking.

Download here!

Model by THI, editing and picture by Cotton Eyed Joe. Info from Bulbapedia

Meganium

Another great Pokemon papercraft by POdragon; Meganium!

Meganium is a sauropod-like Pokémon. Instead of having a leaf coming out of its head, like its two previous evolutions, Chikorita and Bayleef, it has two style-like protrusions sprouting from the top of its nose, each with what looks like their own stigma. The leaves around its neck seem to have sprouted into a large pink flower with white tips.

Download here

By POdragon

Espeon

I can't believe I didn't post this before! It's an Espeon!

Espeon is the result of an Eevee trusting a Pokémon Trainer very much, then being leveled up during the day. Its catlike appearance and red gem have made some mistake it for a relative of Persian, however, this gem merely augments its psychic powers. Its tail, which is forked a bit like a Buizel's, also helps it to foresee possible futures.

Download here

By Schlenkster

Expect to see some more Pokemon papercraft the next few days, along with some Mario awesomeness.

Pikachu(2)

A great and cute little pikachu!

In the Pokémon franchise, Pikachu are often found in forests, plains, and, occasionally, near mountains, islands, and electrical sources (such as power plants), on most continents throughout the fictional world. As an Electric-type Pokémon, Pikachu can store electricity in its cheeks and release it in lightning-based attacks.

Download this Pikachu here!

Sandshrew

Jup, that's right! 3 posts in a row! Last post for today(probably) features a Sandshrew.

A Sandshrew is a ground-dwelling rodent notable for its defensive capabilities. Its body is mostly covered in a dry, tough hide which is colored to blend in with the sands of the desert. It can curl into a tight ball about the same size as a basketball to protect its soft underbelly. Its primary weapon is the small but sharp claws on its paws, which are also useful for burrowing and can sometimes be poisoned.

Download here

By PMF, picture by louispierce

Bulbasaur

The cute little Bulbasaur joins the Papercrafthype!

Bulbasaur first appeared in 1996 among the first Pokémon video games, as one of three starter Pokémon the player can choose from at the beginning of the games. In the Pokémon franchise, Bulbasaur can often be seen napping in bright sunlight. By soaking up the sun's rays, the seed on their backs grow progressively larger. As they undergo Pokémon evolution, the seed starts to flower.

Have fun!

Bulbasaur

By PMF, picture by HaywanChiu

Pokemon Rescue Team Blue/Red Pikachu Headquarters

Over the next few days I'll be posting a lot of Pokemon papercrafts. Luckily there's quite a bit of Chokipeta, so I thought I should start it off with this great find! Where would we be without Goblin Guy? This is the Pikachu Rescue Team Base from Pokemon Rescue Team

Blue and Red. The game was rather popular, and has had 2 recent sequels, with the 4th generation Pokemon. I never really "loved" the game, but I remember buying a DS in anticipation for it to come out. Red and Blue were different in not just the Pokemon they have, but for systems too! Blue was for the NDS, while Red was made for Gameboy Adv. This was a great strategy, because Nintendo could get buyers who had a DS and Who didn't. Sadly, it came out a while later then the brink of the switch of the systems, which probably would have brought more customers. Instead of using wireless connection it used multiple codes and Wondermail, so you could rescue your friend even if their game in a different system. Anyways in Pokemon Mystery Dungeon you would take a mood test, and your game would determine which Pokemon you were most like, then push you into a new world of Pokemon(wirthout humans), apparently a different dimension from the normal world. After rescuing a group of Mankeys, they upgrade your base to look like your species(kinda creepy, don't ya' think?) If the Pika house design has changed, I'm not sure, scince I didn't buy Pokemon Mystery Dungeon Time or Darkness.

Pika Base P1
Pika Base P2

Designed by Chokipeta, and Magazines bought by Goblin Guy

Edit: Links updated!

Polywhirl

Hello!

This time I have an old model of mine that wasn't posted, so I'll put it here for archiving purposes.

As you can see it's Poliwhirl


Download here:

Normal
Shiny
.PDF files

*Edit: There's a guy on the shoutbox trying to impersonate me, saying I'm working on Naruto models, that's not true, please don't believe that, if I make something other than a Nintendo papercraft I'll post it in the forum and on my personal blog.

Mewtwo

I think it's time for a Pokemon once again! Mewtwo to be exact. This papercraft shouldn't be too hard. I think beginners could even start with this one. Mind though that the background was black. I cleaned out most of the black, but it still shows some. Just cut the papercraft out and ignore that weird black stuff.

Have fun!

Mewtwo

Via mail from Ryan, picture by Paperkraft.net

Lucario

Yes, it's that time of the month again....the time when a new brawl papercraft gets released! This time it is the blue aura pokemon: Lucario

Lucario is a rather difficult character to play as in brawl, mainly because of his unique aura attacks. This pokemon can sense and use the aura eminating from every living thing to attack or simply to "see". Therefore, it probably has the longest range of any character in the brawl. It's attacks reach farther than your opponent suspects, and then catches him off guard. Also, the more damage that he accumulates, the more damage he deals out. You want to try to pick off this guy early before he gets too powerful.

God also has a longer reach than we expect him to. In fact, his reach is to all things, and he controls all things. He can see everything we do, and controls every circumstance in our lives for our own good. Now, many people say, "There are so many bad things in the world, either God isn't there anymore, or he just doesn't care." Neither of these statements are true. God work all things to our good not earthly happiness. His will is that we go to heaven (eternal happiness) and he will often put us into uncomfortable circumstances to get us there. E.G. you get cancer, and then turn to God in your misery and accept his free gift of salvation. In this case he used sickness to gain your attention so that you would turn to him. He is in complete control over all things.

You can download Lucario, (who does not have control over all things) here. The pack contains a .pdo, a instructions .pdf, and .jpegs for mac users.

Have fun!!

- Red Yoshi

This papercraft was designed by Red Yoshi (3d design) and Gazamaniac (test build and instructions)

Blastoise

Hi guyz and girlz! I'm back from vacation! Was away for a week, as you might also have noticed in blogposts. I apologize for this. This is completely my fault since I left the staff with too few papercrafts.

Anyway, there should be a daily update again from now on! And today's papercraft is Blastoise! Blastoise is the evolution of a Wartortle. Blastoise is a bipedal, large, blue tortoise with a brown shell and two water cannons that jut out of the top of its shell. The cannons can be withdrawn inside the shell, or rotated to point backwards; this enables Blastoise to commence jet assisted rams. It can shoot water from its cannons with enough force to punch holes in steel, and enough accuracy to hit an empty can 160 feet away.

Onto the papercraft part!

Download Blastoise!

By schlenkster. Original Topic

Totodile

Hello!  I am Navi, and although a few of my models have been on the blog, this is my first post as a writer for the site.  So, today I bring you a new model!  One of my own: a Totodile.  The totodile is, of course, one of the basic Pokemon.  This model, though somewhat complex at certain parts, is a fairly easy build for the most part, so a moderate crafter, or a dedicated beginner should easily be able to complete it.

The red spikes on the back of the standard totodile are included in the model, though they are not shown in the example.  Also, for the most difficult part of the model, the hands, an alternate part is provided (without fingers) to help those looking for a quicker build.  I hope all the poke fans out there enjoy this one!

Download Totodile

You will also be able to find this model, with some extra pictures of a built example, on my site shortly.

Dratini

I thought it was time for a Pokemon papercraft again. This one is pretty old, but cool nonetheless. Dratini is a Dragon Pokémon with a white circle-shape on its forehead. It is #147 in the National Pokédex. Dratini can be found in Pokémon Red, Blue, Yellow, Gold, Silver, and Crystal just by fishing with a Good Rod or Super Rod.
The name Dratini is a combination of dragon, tiny and possibly mini, or teeny, which is an informal alteration of tiny, despite Dratini being born at almost 6 feet in length. Even so, Dratini's Japanese name Miniryu contains the word mini meaning small, and ryū, Japanese for dragon. Its English name was originally going to be Dragoon.

Have fun!

Download Dratini

By Pixel-Kakashi, Picture by z8-0

Turtwig

The official Pokemon site just released another model! Turtwig! This one is about the same size as the other papercrafts from the ranch, and shouldn't be too hard to make.

Turtwig are small, turtle-like Pokémon, and are one of the three starter Pokémon for the Sinnoh region. Its prominent jawbone may denote a relationship to the snapping turtle. Its green and yellow body is covered by a shell. A small seedling grows on its head, similar to the plant bulb on Bulbasaur's back and the leaf on Chikorita's head.

Download them now!

Chokipeta Chimchar

Horray, a Chokipeta! This one is the pokemon chimchar. Chimchar is one of the starter pokemon from diamond/pearl on the DS. This model was edited by !bgREVLN8FU on 4chan, to get rid of all of the wasted ink space. Also, thanks to Goblinguy for making this available to us all. Have fun building!


Page 1, Page 2

Picture by PaperBuff

Pokemon Ranch Pipulp

This is a pretty simple papercraft to make your own Piplup in the same form as seen in the WiiWare title My Pokemon Ranch. Pokemon ranch is a pretty nice WiiWare game that only costs 1000 points(or $10) and allows you to import pokemon form your Diamond or Pearl game too. This is a very nice and easy papercraft with simple instructions so you wont get lost in building this one.

Grab this awesome papercraft for your collection here.

To save this papercraft to your computer right click on the link and select "Save Link As..."

Snorlax

I still remember the time that I first encountered the Snorlax. I Had to have it! It was pretty hard not to kill the guy in the process, although he has quite some stamina. Eventually, I always caught both Snorlax in Firered.

Now you can make your own Snorlax papercraft, just like that. The pack contains a lined and lineless pdf, and even the PDO file (to be openend in Pepakura Designer/Viewer)
Have fun!

Download here!
Rapidshare, Mediafire

By PMF

Umbreon

A great Pokemon Papercraft by Pixel-Kakashi. Umbreon is the Pokémon that Eevee evolves into when it has gained a complete trust of its trainer at night. It has a black body with yellow bands on its ears and tail. Umbreon's forehead and legs have yellow rings on them.

Have fun ^^

Download

By Pixel-Kakashi

Picture by z8-0

Haunter

I've posted Gengar before. Now meet it's prevolution: Haunter. I personally think Haunter looks much cooler then Gengar. Have fun building it!

Download Haunter

By Pixel-Kakashi

Dialga

One of the legendary Pokemon from Pokemon Diamond. Grab it now!
Oh yeah, due to stressful last weeks I don't add too much text :p

Download here

By Egg Feeling (I think) Picture by AustinMeadows

Combee

One of the pokemon that appeared in the fourth generation: Combee. If you had a female version, it could turn into Vespiquen. If you had a male version however, it didn't evolve. This made it hard to get the Vespiquen pokemon in the series.
But back to the combee. It's a 1page template, and I don't think it should give you too much problems.

Note that there are a few different expressions you can give your combee. One on each page.
Enjoy!

Combee

Gengar

A bit later then usual, but here it is again: the daily update :P

This time I have a Gengar for you. I thought it was time to post a pokemon papercraft again. I just found the picture of the finished result. Personally, I didn't really like Gengar. I thought Haunter was way cooler, so I never evolved Haunter into Gengar for appearence purposes. I didn't build this one myself, so I have no idea if it's a good buildable model, but most of Pixel-Kakashi's models are pretty good, so I guess this one is too.

Have fun!

Download Gengar

By Pixel-Kakashi

Charmander

Another chokipeta papercraft! These were always my favorite papercraft. Their quality is sky-high! Someday I hope to be able to design papercraft like chokipeta. The photo of this papercraft is by chartodileon, a great papercrafter. Hope you enjoy building this one!

Charmander: page 1, page 2

by Chokipeta

Diglett

Pixel-Kakashi made another great pokemon for us! This time, it's Diglett! I haven't built it myself, but since I have never seen a Pixel-Kakashi papercraft that didn't work, I'm fully confident this will be buildable as well.

Enjoy!

Download Diglett

By Pixel-Kakashi

Magnemite

It's Pokemon time once again! This time it's Magnemite. I never really used electric pokemon that much in the Pokemon games for some reason. I did like Magnemite though: steel and electric packed into one Pokemon. Plus the fact that it's evolution actually made some sense, unlike the evolutions from the 4th generation. You can make your own Magneton too if you just attach 3 Magnemites to eachother.

Note that in the zip file there are two different Magnemite papercrafts. The one you see on the picture here is in the PDF file. There is no picture available yet from the JPG-filed Magnemite. 

Have fun!

Download Magnemite!

By Sane Person.

Omastar, Kabuto & Aerodactyl

Ok... these aren't the best quality papercrafts on the market. But that doesn't mean they aren't cool. They are easy to make (I think they are designed for children) and are just 1 page to build.  These papercrafts were released in Japan a while ago, and someone took the time to scan these things. All three pokemon are included in the both download links. Have fun!

Download (Rapidshare)

Download (Mediafire)

Gardevoir

There are a lot of Pokemon papercrafts available on the internet. A load of them are pretty crappy though, so I decided not to post them. Whenever I come across a good-looking pokemon however, I will absolutely post it. I thought this Gardevoir looks pretty cool. Gardevoir has been one of my favourite pokemon for some reason. I really love her psychic power. I don't like its 4th generation male-side though.

Be sure to check out the other models on the creators site. He made some pretty cool Red Alert papercrafts, and some other interesting stuff.

Download Gardevoir!

By Nezard

Pokeballs

*Insert random pokemon* I choose you! Yup, those little pesters live in these things called Pokeballs. Yeah, I'm talking about Pokemon. I'll be honest, I played loads of Pokemon when I was younger, so I can name most pokemon. And I think A LOT of people are actually a pokemon fan, although they won't admit it in public. It is for children after all ;)

Anyway, this blog is about papercraft, so I'll stop whining and just give you the links to the friggin Pokeballs. Happy papercrafting!

Pokeball (Easy 1 page version)

Download detailed Pokeballs here!

Picture by Gazamaniac

Chokipeta Pickachu

This is a awesome Pickachu papercraft from the great papercraft-engineers from Chokipeta

Download it here! 

Ogiginal Site: http://chokipeta.jp/